TYPE OF FLOOR |
WOOD, MARBLE, LINOLEUM |
Step 1 CLEAN |
-- Dilute the Neutral Cleaner in the tank following the instructions on the bottle.
-- Use the Cleaning Machine with tan cleaning pads.
-- If the floor is very dirty use the green scrubbing pads.
-- Mop and let dry.
-- Follow with step 2
|
Step 2 POLISH |
-- Use the Cleaning Machine with dry tan pads on dry scrubbing brushes.
-- Continue with step 3 |
Step 3 BUFF |
-- Apply two coats of the High Gloss Protective Floor Finish.
-- Between waxing use the Cleaning Machinee with lambs wool pads to maintain a high gloss finish. |
Step 4 TOUCH UPS |
-- To remove scuff marks from the floor's finish use the Cleaning Machine with dry tan pads.
-- If the floor is very dirty, use the Cleeaning Machine as described in step 1. |
| TYPE OF FLOOR |
CARPETING & RUGS |
Step 1 CLEAN |
Shampoo
-- Dilute Dry Foam Shampoo in the machine tank following the instructions on the bottle.
-- Use the Cleaning Machine with soft whitte bristle carpet brushes.
-- Use the trigger mechanism to dispense tthe right amount of shampoo sparingly until you see a white foam on the carpet.
-- Guide the Cleaning Machine with forwardd and backward movements. |
Step 2 LET DRY |
-- After shampooing let dry, 3-4 hours, preferably over night |
Step 3 VACUUM |
-- Vacuum crystallized dirt debris. |
Step 4 TOUCH UPS |
-- Use the Cleaning Machine with the Dry Foam Rug Shampoo to remove spots and maintain high traffic areas without the need to shampoo the entire carpet.
-- To remove difficult stains use the Kobllenz Carpet Spotter before shampooing. If you have heavy grease based stains use the Cleaning Machine with the Heavy Duty Cleaner. Follow with the Dry Foam Rug Shampoo |
| KIND OF FLOOR |
CERAMIC TILE, GROUT, VINYL & CONCRETE |
Step 1 CLEAN |
Heavy Duty Cleaner *
-- Dilute the Heavy Duty Cleaner in the tank of the Cleaning Machine following the instructions on the bottle.
-- Use the Cleaning Machine with the naturral bristle brushes or green scrubbing pads.
-- Mop and let dry.
-- Continue with step 2. |
Step 2 POLISH |
-- Use the Cleaning Machine with dry tan pads to obtain a high gloss shine follow with step 3. |
Step 3 BUFF |
-- Apply two coats of High Gloss Protective Floor Finish with a sponge. Buff with felt pads.
-- Between waxing use the Cleaning Machinee with felt buffing pads to renew the shine. |
Step 4 TOUCH UPS |
-- To remove scuff marks, use the Cleaning Machine with dry tan pads, these will remove marks without dulling the finish.
-- If the floor is very dirty, use the Cleeaning Machine as described in step 1. |
| |
*NOTE: Scrubbing brushes are recommended for textured surfaces and grout, green pads are recommended for smooth surfaces. |
